HP zx2000 Start Here Manual page 7

right side of the page. Select workstations under the
personal computing link or Itanium®-based servers
under the servers link to access the appropriate
manual.
Configuring Serial Console
Before Linux boots, all console interaction is through firmware. To
modify the default local graphics display to a serial console path,
configure a single serial port (UART) for both Console In and
Console Out in the boot manager interface. When the Linux
kernel boots, it interprets the UART as
puter output to the chosen display screen.
To begin:
1. When your system boots, select the Boot option
maintenance menu from the EFI Boot Manager
screen and press
2. From the menu, highlight Select Active Console
Output Devices and press
.
Enter
7
and sends the com-
ttyS0
.
Enter