Enablement Kit Menu Options - HP zx2000 Start Here Manual

Enablement Kit Menu Options

Note Read the instructions in "Executing a Menu Option" in
this section for important information before making a
selection and using the instructions provided here.
1. Recover factory pre-configured image
Select this option to recover a factory pre-configured operating sys-
tem image. To complete recovery, use the image on the System
Recovery CD that came as part of the Linux media with your pur-
chase from HP.
After selecting this option, insert the CD with the preconfigured
image into the drive, choose the disk you want to install to from the
displayed list, and select
destroyed and overwritten by the system image. Click
tem image recovery is complete and reboot the system at the
prompt. To exit without recovering, select
2. Install Linux from distributor media
Choose this option to install Linux yourself. Before operating sys-
tem installation, the enablement kit prompts you to prepare respec-
Any data on the disk you select will be
Ok.
18
when sys-
Ok
.
Cancel: