Appendix A- Using Smart Array With Linux On Itanium 2-Based Servers - HP zx2000 Start Here Manual

Appendix A- Using Smart Array with Linux
On Itanium 2-based Servers
If your Itanium 2-based server has a Smart Array card, it is detected
when you power on your system, and you see the following
prompts:
Press F8 to use the Option ROM Configuration
for Arrays Utility
Press Esc to skip configuration and continue
If you don't configure the RAID arrays when you boot the server,
the HP Enablement Kit for Linux prompts you to reboot and con-
figure when it finds the Smart Array controller during its hardware
discovery process.
Note Some serial consoles do not support function keys,
although HP recommends using serial consoles that do.
To access the Option ROM Configuration for Arrays
(ORCA) menu from a console that doesn't, press
then to simulate
8 F8
.
34
Esc