Configuring Your Console - HP zx2000 Start Here Manual

Configuring Your Console

The default console configuration for the Itanium 2-based system is
a local graphics display using a USB keyboard and requires no
setup.
The display screen can also be a remote serial console connected
through a serial port or through a terminal attached to a serial port.
Examples include a management processor's serial port or a net-
work connection through a management processor that the system
treats like a serial port. If you plan to use a serial console, configure
it using the directions in this section before using the HP Enable-
ment Kit for Linux.
Note The management processor is part of the management
card. It monitors system status and can control aspects
of system operation such as power, resets,
software/firmware upgrades, and cooling.
See
for documentation about the management processor.
Select manuals from the support services link on the
http://h20000.www2.hp.com/bizsupport
6