Getting Started With The Hp Enablement Kit For Linux - HP zx2000 Start Here Manual

Getting Started with the HP Enablement Kit
for Linux
Use one of the two following options to boot the HP Enablement
Kit for Linux CD. Option 1 is recommended. Once the enablement
kit main menu is up, proceed to instructions under "Enablement Kit
Menu Options."
Note To use a serial console as your display screen,
configure it prior to using the enablement kit for Linux.
See "Configuring Your Console" in this booklet for
more information.
Boot Option 1
1. Insert the HP Enablement Kit for Linux CD in the drive and
reboot the machine. The EFI boot manager loads.
2. At the Please Select a Boot Option prompt, use
your arrow keys to highlight Boot Option Maintenance
Menu and press
3. At the Select an operation prompt, Boot from a
.
Enter
12