allows you to choose from a list of network mirrors or you can
select one of your own.
Executing a Menu Option
1. If using a serial console as your display, specify the port and
baud rate number at the kernel options: prompt located
below the menu selections to identify the console to the kernel
and configure it appropriately. If using VGA, do not enter
anything.
The console is factory pre-configured for 9600 baud. If you have
not reconfigured this value, type:
kernel options: console=ttyS0,9600n8
To set another baud rate, type:
kernel options:
2. Now highlight a menu option using the arrow keys and press
to execute.
Enter
To return to the EFI shell from the enablement kit menu
without choosing an option, press Ctrl C.
console=ttyS0,<baud rate>n8
23