Related Manuals for Dakota Alert SBB-4000
Summary of Contents for Dakota Alert SBB-4000
- Page 1 Dakota Alert WIRELESS SECURITY EQUIPMENT Solar Break Beam Transmitter SBB-4000 USER GUIDE...
-
Page 2: Tools Needed
TOOLS NEEDED: • Philips Screwdriver • 7mm Wrench or an Adjustable Wrench BACK OF BEAMS NOTE: Remove the protective plastic covering the lenses and solar panels PACKAGE CONTENTS: • Break Beam Pair “A” and “B” (2 sensors) • (8) M4x10 Pan Head Screws with Flat Washers and Lock Washer •... -
Page 3: Pairing The Sensors
NOTE: It is recommended to charge both the “A” and “B” unit via a USB Micro charger (not included) for about 4-6 hours before starting the initial set-up. PAIRING THE SENSORS: 1. Before mounting the sensors in a permanent location, start by placing them on a table or other flat surface about 6 to 12 inches apart with the three IR lenses pointing towards each other. - Page 4 2. Please refer to your receiver manual for coding instructions of your particular receiver. 3. To activate the SBB-4000 to send a signal to your receiver, either break the beams while they are paired or quickly press and release the power button on the “A”...
-
Page 5: Mounting The Sensors
MOUNTING THE SENSORS: Before mounting, choose a suitable location: • The recommended mounting height is about 3 feet. This will help to avoid false alerts from small animals crossing under the beams. • The sensors can be mounted up to 300 feet apart facing each other. •... - Page 6 MOUNTING SENSORS TO THE “C” BRACKET: 1. Make sure both the “A” and “B” units are powered on and the rubber plugs are inserted into the power button recess. 2. Use the provided small screws, split ring lock washers and flat washers to mount the “A”...
- Page 7 RECHARGING THE BEAMS: The beams will charge automatically outdoors with the built-in solar panels. If the beams are used in an interior location with no light, they can be manually charged. 1. For interior locations, remove the rubber plug from the power button. 2.
-
Page 8: Troubleshooting
• Do not disassemble or attempt to repair the product. • Do not install this unit with any other infrared detectors as this may cause false signals. • Do clean and inspect the beams regularly for proper use. If any trouble is found, please contact Dakota Alert, Inc. - Page 9 Warranty: Dakota Alert warrants this product to be free of defects in materials and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of God, or improper operation.
- Page 10 PR-4000 Portable Receiver The PR-4000 receiver is compatible with all Dakota Alert 4000 series transmitters. It can receive and store alert signals from up to 16 different 4000 series transmitters.
- Page 11 DCMT 4000 Transmitter The DCMT-4000 motion detecting sensor operates on one 9-volt battery (not included) and detects a person or vehicle passing by out to about 100 feet. UT 4000 Transmitter The UT-4000 operates on a 3-Volt lithium battery (included) and has several different methods of activation.
- Page 12 Dakota Alert, Inc. www.dakotaalert.com Phone: (605) 356-2772 Fax: (605) 356-3662 Address: 32556 477th Ave. | P0 Box 130 | Elk Point, SD 57025...