Mio MiVue 795 Series User Manual page 22

Parking Mode
l
Allows you to change the settings of Parking mode. The available settings
include:
Detection: When enabled, the dash cam will automatically start recording
l
when it detects movements or if an event happens in Parking mode.
Detection Method: Sets the parking detection method to Only G-sensor,
l
Only Motion or Both Motion & G-sensor.
Auto Entry: Sets the mode (Low, Medium, High or Manual) for the system
l
to enter Parking mode automatically.
Motion Detection: Sets the sensitivity level of motion detection to Low,
l
Medium or High.
G-Sensor Sensitivity: Sets the sensitivity level of the G sensor that allows
l
automatic triggering of the parking recording when the dash cam is in Parking
mode.
LED Indicator: Turns on or off the parking indicator.
l
Video Recording
l
Changes the settings of recording, including:
Video Clip Length: Sets the length of each video clip for a continuous
l
recording.
Video Resolution: Sets the resolution of the video.
l
WDR: Enables the Wide Dynamic Range (WDR) function to improve the dash
l
cam's image quality under high-contrast lighting conditions.
EV: Sets the exposure level to adjust the brightness of the image.
l
Frequency: Sets the frequency for the camera to avoid problems caused by
l
artificial light sources that are not constant.
21