Mio MiVue 795 Series User Manual page 20

Front Tyre Sensors: Sets the minimum/maximum pressure and maximum
l
temperature for the front tyres.
Rear Tyre Sensors: Sets the minimum/maximum pressure and maximum
l
temperature for the rear tyres.
Sensor Location: Sets the sensors' locations.
l
Learning Mode: When new TPMS sensors are installed, use this option for the
l
dash cam to detect the new sensors.
Note: For more information on installing and using TPMS, see the documentation that comes
with the product.
Driving Safety
l
The dash cam provides advanced driving safety functions to make your driving
safer.
Calibration: Follow the steps to calibrate the system.
l
1. Drive the vehicle in the middle of the lane.
2. Ask a passenger to select this option and then follow the on-screen
instructions to complete calibration.
Note: You are advised to calibrate the system constantly in order to be alerted properly.
LDWS: Select Beep or Voice to enable the LDWS (Lane Departure Warning
l
System) function. The system will alert you when it detects that the GPS car
speed is over 60 km/h and the car has strayed from its intended lane.
Headlight Reminder: Once enabled, the system will remind you to turn the
l
lights on when you are driving after dark. The default setting is Off.
Please adjust your device to
align the red line with the
horizon, and the green line
with the centre of the lane.
19
Please align the blue line with
the hood.