Advertisement
Rear View
Security lock anchor
By connecting a security lock (purchased separately) to the
security lock anchor, the monitor is fixed so that it cannot
USB port: Upstream (1 Port)
be transported.
A USB-ready computer or
self-powered USB hub can
The theft prevention hole works in conjunction with
be connected here.
Kensington Micro Saver Security Systems.
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS
1. CONNECTION
1-1. Connecting the monitor to a computer
(PC etc.)
When connecting, ensure that both the monitor and computer are
switched off.
Firmly insert the analog RGB output terminal
(mini D-sub 15 pin with 3 rows) then tighten the
screws each side.
RGB cable
If connecting to a D-sub 15 pin 2 row Apple Power
Macintosh, attach a Macintosh conversion adapter
(to be purchased separately) to the RGB signal
cable.
Macintosh conversion adapter
RGB signal cable
After connecting the adapter, tighten the
screws on each side to fix into place.
Note: Never block the ventilation
Ventilation
openings as this may lead to
openings
overheating inside the monitor
and result in malfunction
Power connector
The power cord is
connected here.
RGB signal cable
This is to be connected to the
computer's analog RGB output
terminal.
Side view
Main power switch
( I ) Turns the monitor on.
(O) Turns the monitor off.
1-2. Connecting the monitor to a power source
Before connecting, first turn off the monitor's main power switch.
1
1-3. Connecting a USB device
If your computer or computer's OS is USB compatible, the monitor
can be connected to a USB device.
1. Plug one end of the USB cable (provided) into the monitor's USB
upstream port.
2. Connect the other end of the USB cable into the computer or the
USB downstream port.
USB cable
(provided)
To the computer or another
USB hub's downstream port
USB port: Downstream (2 ports)
A USB device can be connected
here.
AC outlet
2
Power cord
USB upstream port
Advertisement
