Chapter 3. Dissasembly And Reassembly - Sharp LL-T1501A Service Manual

CHAPTER 3. DISASSEMBLY AND REASSEMBLY
[1] SEPARATING LCD FROM STAND
1. Pull the cover rearward and remove.
2. Slide the rear arm upward to remove.
3. Remove the screw and remove the hinge cover A
2
4. Remove the four screws and remove the inside cover
1
1
2
.
1
.
1
2
5. Remove the screw and remove the clamp
1
6. remove the connector and tie cable
1
2
7. Remove the four screws
and stand can be separated from each other.
1
.
2
.
securing the hinge. Now, the LCD