Download Print this page

Connection, Adjustment, Operation And Functions - Sharp LL-T15V1 Service Manual

Hide thumbs Also See for LL-T15V1:

Advertisement

PC-UM10M
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS
1. CONNECTION
1-1. CONNECTING THE MONITOR TO A COMPUTER
(PC ETC.)
When connecting, ensure that both the monitor and computer are
switched off.
Note: Do not overly bend the cable or add extension cords as this could
lead to malfunction.
Firmly insert the analog RGB terminal
(mini D-sub 15 pin with 3 rows) then
tighten the screws each side.
RGB signal cable
If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh conver-
sion adapter (to be purchased separately) to
the RGB signal cable.
Macintosh conversion adapter
RGB signal cab le
After connecting the adapter, tighten the
screws on each side to fix into place.
1-2. CONNECTING THE MONITOR TO A POWER
SOURCE
Before connecting, first turn off the monitor's main power switch.
Note: Do not overly bend the cable or add extension cords as this could
lead to malfunction.
1. Connect the AC adapter to the monitor's power terminal
Power terminal
2. Attach the power cord to the AC adapter and place the power plug
into the AC terminal
AC adapter
AC terminal
Power cord
LL-T15V1

CONNECTION, ADJUSTMENT, OPERATION AND FUNCTIONS

2 – 1
2. POWER ON/OFF
2-1. TURNING THE POWER ON
1. Press the monitor's power button.
2. Turn on the computer.
The power LED will be lit green, and the screen will display an
image.
Press power button
Notes: • If using the monitor for the first time or after having changed
the system setting during use, perform an automatic screen
adjustment.
• Depending on the computer or OS, it may be necessary to
use the computer to install monitor set-up information. If so,
follow the steps below to install the monitor set-up informa-
tion.
2-2. TURNING THE POWER OFF
1. Turn the computer off.
2. Press the monitor's power button.
The Power LED will disappear.
If the monitor is not going to be used for a long period of time, be
sure to unplug it from the AC outlet.
Turn off device
to which monitor
is connected
OFF
Turn on device to
which monitor is
connected
ON
Press power button

Advertisement

loading