infaco A3MV2-12V Original User Manual page 19

The machine no longer operates, the tying head is stuck
1
Push rod , which hits against ring
trajectory and become stuck on the outer edge of ring.
3
The arm often remains locked and can't open completely.
as you may damage the mechanism.
Bring tying head in to a central working position, following the arrow below. Then take
hold of ring and move it forwards and backwards until the push rod returns to its position
beneath ring.
It is normal for the tying head to resist and make you force it to bring it back into its operating
position.
3
Arm
Ring is released when the push rod has returned to its initial position. The arm must be fully
open. Check that the tying head can turn freely again.
You can then switch the machine back on and resume tying operations.
2
when the wire is cut, sometimes goes out of its
Do not try to force arm open
1
Push rod
2
Ring
19