infaco A3MV2-12V Original User Manual page 18

3. The wire is jammed
Try first of all to take hold of the wire at the back of the machine and push it forwards.
• If the wire emerges switch the machine back on.
Press control switch to carry out a short cut, then resume tying operations.
• If the wire does not emerge, pull it right out of the machine.
To do this: unclip lever.
Thread the wire through until it emerges.
Switch the machine back on and press
control switch to carry out a short cut.
(1)
18
(1)
Remove the wire; it may be jammed
because of a bend, in which case you will
need to pull firmly to remove it.
Then straighten
wire so that it threads
smoothly.
Unclip lever and resume tying operations.
(2)
(2)
the