Using The Appliance - R.G.V. ROBUSTA Instruction Manual

At first use
J
J1. Remove all the components of the packaging and the possible labels; dispose everything
according to the legislative provisions in force.
- Before disposing of the materials of the packaging, make sure
that all components indicated in paragraph "H" are present.
J2. Place the appliance on an horizontal and stable bearing plane.
Make sure that all feet (2) are supported by the plane.
J3. Clean the appliance body (1), the duct (1a), the pressing device lever (3) and the re-
straining cover (11) with a moist cloth.
J4. Remove and wash the grate roller (6), the clean the appliance as described in paragraph
"N" (Cleaning and maintenance).
The grate roller (6) is equipped with sharp parts; handle it with care.
J5. Assemble the components as described in paragraph "N".

Using the appliance

K
K1. Place the appliance on an horizontal and stable bearing plane.
Make sure that all feet (2) are supported by the plane.
K2. Completely unroll the power cord.
K3. Connect the plug to the power socket making sure that the mains voltage corresponds
to the one indicated on the appliance data label.
Make sure the power cord does not protrude from the bearing plane
to avoid that someone may, even inadvertently, pull it overturning
the appliance.
K4. Raise the pressing device lever (3).
K5. Ensure that the restraining cover (11) is cor-
rectly positioned on the pressing device lever
(3).
If that happens, work as described in the par-
agraph "M".
K6. Position the container (8) in its specific seat.
Do not use the appliance without hav-
ing placed the container (8) under the
outlet mouth first.
K7. Insert the food to be grated in the duct (1a).
1a
8
EN
3
11
29