Page 3
This document outlines the process of booting an NTC-220 series router into recovery mode and flashing the main firmware image to restore functionality in the case where a failure has occurred.
Page 4
Click the Upload button to begin the transfer of the firmware file to the router. When the file has completed uploading, click on the Install link next to the firmware image file. NTC-220 Series – Recovery via Recovery Console Guide 4 of 6 FA01392 v1.0 28 September 2021...
Page 5
To ensure that the router runs correctly, it is necessary to perform a restore to the factory default settings. This means that any previous settings on the router are erased. NTC-220 Series – Recovery via Recovery Console Guide 5 of 6 FA01392 v1.0 28 September 2021...
Page 6
Click on the Retore button. The router resets all settings to the factory defaults and reboots to the main firmware. The recovery process is complete. NTC-220 Series – Recovery via Recovery Console Guide 6 of 6 FA01392 v1.0 28 September 2021...