HP Vectra VL6 8 Hardware Manual page 5

Replacing hardware components

Hide thumbs Also See for Vectra VL6 8:

Table of Contents

Replacing the Airflow Guide (Minitower Only)

1 Remove the computer's cover (described in this chapter).

2 Before removing the airflow guide, disconnect the cable from the

backplane.

3 Lift the front of the airflow guide and slide it out of the PC.

Step 2

4 First insert the rear of the new airflow guide to engage the hinges,

then lower it into place.

5 Reconnect the airflow guide cable to the backplane.

6 Replace the cover (described in this chapter).

HP Vectra VL 8 Replacing Hardware Components

Replacing the Airflow Guide (Minitower Only)

Step 3

English

Table of Contents

Vectra vl series 8