HP Vectra VL6 8 Hardware Manual page 23

9 Position the other mounting bracket on top, aligning it properly so
that it clicks into place.
10 Using both hands, lift the drive unit and slide it back into the
computer about halfway.
11 Attach all data and power connectors.
12 Then push the front drive unit fully into the computer until the two
retaining clips click into place.
13 If the drive you are installing requires it, fit the universal front filler.
14 Replace the cover (described in this chapter).
In the Minitower
1 Remove the computer's cover and front panel (described in this
chapter).
2 Remove the old drive's connectors.
HP Vectra VL 8 Replacing Hardware Components
Replacing the CD-ROM, DVD, Tape or Zip Drive
English 23