HP Vectra VL6 8 Hardware Manual page 33

Replacing the Power Switch (Minitower Only)
1 Remove the computer's cover (described in this chapter).
2 Remove the power switch's power connector from the system board
(to find out where this connector is, refer to the diagram on page
12).
3 From inside the PC, gently push the power switch outwards until it
is released.
4 Insert the power switch and reconnect the power connector.
5 Replace the computer's cover (described in this chapter).
HP Vectra VL 8 Replacing Hardware Components
Replacing the Power Switch (Minitower Only)
English 33