Cleaning And Maintenance - Bosch VitaPower 8 Series Instruction Manual

en

Cleaning and maintenance

12. Remove the the connection of the
vacuum hose from the bag. Hold the cap
securely and remove the hose from the
vacuum valve.
Opening containers, the ToGo
bottle or zip bags
X Fig. G
■ To open the container, grip the vacuum
seal at one end and pull it up. Sufficient
air has to get inside the container.
■ Remove the lid.
■ To open the ToGo bottle, turn the
drinking cap.
■ To open a zipper bag, pull the zip lock
apart and open completely.
■ After use, vacuum zipper bags must
be cleaned carefully and dried off
completely.
Cleaning and maintenance
The appliance and the individual parts used
must be thoroughly cleaned after each use.
W Risk of electric shock!
– Unplug the appliance before cleaning it.
– Never immerse the base unit in liquids
and do not clean it in the dishwasher.
– Do not use a steam cleaner.
W Risk of injury!
Do not touch the blender knife with your
bare hands. Use a brush.
Warning!
– Do not use cleaning agents containing
alcohol or spirits.
– Do not use any sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
Notes:
– Clean all parts immediately after use.
This will prevent residues from drying on
and possibly attacking the plastic (e.g.
essential oils in herbs).
– When processing food such as carrots,
plastic parts may become discoloured,
but this can be removed with a few
drops of cooking oil.
28
In Fig. M you will find a summary of how to
clean the individual parts.
Using cleaning programme
For quick and easy precleaning.
■ Fit the empty blender jug onto the
appliance.
■ Fill with 0.25 litres of warm water and
2 drops of washing-up liquid.
Warning!
The specified quantity of 0.25 litres must
not be exceeded.
■ Fit the lid and press on firmly.
■ Close the cap and press down to the
stop.
■ Set the rotary selector to 0. Switch on
the appliance with
■ Press button. The symbol
up. The status display LEDs light up one
by one.
■ The appliance runs through automatic
precleaning including a brief vacuum
application phase at the start of the
programme. The programme ends
automatically.
■ Switch off the appliance using
Disconnect the mains plug.
■ Remove the blender jug with the lid.
■ Grip the vacuum seal at one end and
pull it up. Sufficient air has to get inside
the blender jug for the lid to be removed.
■ Rinse all parts thoroughly and clean
again if necessary.
■ To make cleaning the blender jug easier,
remove the cover from the handle and
replace once dry.
■ Vacuum zipper bags which will be
reused, should be cleaned carefully and
dried off completely. Bags used to store
raw meat, fish or poultry should not be
reused.
■ Clean the base unit.
Removing the blade insert
X Image sequence J
1. Remove the lid. Turn the blender jug
over.
2. Fit the lid onto the blade insert.
3. Rotate the lid anticlockwise and remove.
button.
lights
button.