Accessories; Safety Systems; Recipes - Bosch VitaPower 8 Series Instruction Manual

4. Remove the blade insert.
Removing the vacuum valve
X Image sequence K
The vacuum valve can be removed for
cleaning.
1. Rotate the vacuum valve anticlockwise
and remove.
2. Thoroughly clean the cap, the two
moisture sensors, the valve and the filter
on the valve.
3. Make sure you dry all parts thoroughly.
4. Fit valve as shown. Marking
to . Rotate the valve clockwise to the
stop. Marking
Removing the setting rings
X Image sequence L
In order to clean them thoroughly, the
setting rings in the lid of the vacuum
container can be removed.
1. Insert a small screwdriver into one of
the two recesses of the safety ring and
carefully lever out the ring by applying
slight pressure.
2. Remove the safety ring and setting rings as
shown. Thoroughly clean and dry all parts.
3. Insert the setting rings in the order
shown. Insert the safety ring by applying
slight pressure until it clicks into place.

Accessories

Accessories and spare parts can be
purchased via trade stockists or customer
service. As the product range is being
constantly extended, it is possible that
there are meanwhile other accessories
that are not listed here. In this case, go to
www.bosch-home.com to see the latest
accessories available.
Accessories
MMZV0BT1 ToGo bottle (0.5 l)
MMZV0SB0
1 container (0.75 l)
MMZV0SB1 1 container (1.5 l)
MMZV0SB2
2 containers
(0.75 l and 1.5 l)
MSZV0FB1 10 bags small, 1.2 l
MSZV0FB3
10 bags large, 3.8 l
pointing
pointing to .

Safety systems

Start lock-out / automatic cut-out
The appliance can only be used with the
blender jug if it has been fitted properly
with the lid and the cap has been closed
completely and properly. The appliance
switches off automatically if the cap is
opened during use.
Moisture protection
The vacuum seal contains two moisture
sensors. If moisture gets into the vacuum
unit, the vacuum pump switches off
automatically. X "Troubleshooting" see
page 31
Overload protection
The motor switches off automatically if the
appliance overheats. X "Troubleshooting"
see page 31
Note: A slightly strange smell may occur if
overload protection is activated. This is not
a sign of any malfunction.

Recipes

Notes:
– Table N shows further examples
of application. The preparation can
be carried out with an automatic
programme or manually in single
steps (1, 2, 3).
– Clean and chop food before processing.
Remove hard components such as
cores and peel.
– The recipes and application examples
can also be carried out without an
automatic programme. To do so, use
the rotary selector to increase the
speed from
all ingredients until the required
consistency is reached.
Strawberry-mint smoothie
– 650 g strawberries
– 6 sprigs mint
– 300 ml apple juice
– 100 ml water
Accessories
to and blend
en
29