Table of Contents
Advertisement
DPN-124G
7. If your ISP uses MAC address binding, in the Ethernet section, in the
MAC address field, enter the MAC address registered by your ISP upon
concluding the agreement. To set the MAC address of the network
interface card (of the computer that is being used to configure the
gateway at the moment) as the MAC address of the WAN interface, click
the Clone MAC address of your NIC switch to the right. To set the
gateway's MAC address, click the RESTORE DEFAULT MAC
ADDRESS button.
8. If your ISP uses authorization via the 802.1x protocol, in the
Authorization via 802.1x Protocol section, move the Enable
authorization via 802.1x protocol switch to the right. Fill in the
fields of the section in accordance with data provided by your ISP. The
section is displayed for the connection of Dynamic IPv4 and Static IPv4
types only.
Quick Installation Guide
25
Advertisement
Table of Contents
