System Board Jumpers - HP Vectra VE4 User Manual

System Board Jumpers

System Board Jumpers
Jumper Name
CMOS Operation
JP5
Cache Mode Selection
JP8*
Processor Speed
JP13
Processor Type
JP16
*When installing an upgrade processor, it is recommended that you use the default jumper settings unless
the processor supplier states otherwise.
Whenever applicable, factory installed processors are configured in write back mode.
Vectra VE 4/xx User's Guide 5 Technical Information
Settin Function
g
1-2 Normal (default)
2-3 Clear CMOS
1-2 Write back mode (with JP8 set to 2-3)
2-3 Write through mode, with JP10 set to 1-2
1-2 (default)
2-3
Write through mode, with JP10 set to 2-3
(default)
Write back mode (with JP8 set to 1-2)
1-2 33 MHz (66 and 100 MHz processors)
2-3 25 MHz (50 MHz processor)
1-2 DX2 Processor
2-3 DX 4 Processor
98