System Board Configuration Jumpers - HP Brio 80xx Online Manual

•
Six expansion card slots for the installation of:
Two 32-bit
or
Three 32-bit PCI cards, two 16-bit ISA cards and one AGP card.
Note

System Board Configuration Jumpers

Clear CMOS
The CMOS
computer. A jumper placed on pins 1-2 prevents changes to the CMOS configuration. This is the default setting. Refer to
Jumper (J22)
"Clearing the CMOS Configuration" on page 31
Microprocessor
This jumper allows the system board to be set so that it matches the speed of the installed processor. You only need to
change the microprocessor configuration jumper, if you install a new processor that has a different processor speed to the
Configuration
one that is currently installed. Refer to
Jumper (J23)
processor upgrade, and changing the jumper settings.
PCI cards, three 16-bit
PCI expansion card slots are generally white plastic grooves.
ISA expansion card slots are generally black plastic grooves lined with silver.
memory stores information, such as your computer's configuration, which is preserved when you turn off your
ISA cards and one AGP card,
for information about clearing the CMOS and using this jumper.
"Upgrading a Processor" on page 44
1 About Your Hardware
Main Components and Features of the System Board
for more information about installing a
12