Starting System Recovery From User-Created Recovery Discs - HP Pavilion All-in-One MS200 - Desktop PC Getting Started Manual

4 As soon as you see the initial company logo screen appear, repeatedly press the F11
key on your keyboard until the Windows is Loading Files... message appears on the
screen.
5 Under I need help immediately, click System Recovery.
6 If you are prompted to back up your files, and you have not done so, select Back up
your files first (recommended), and then click Next. Otherwise, select Recover
without backing up your files, and then click Next.
System recovery begins. After system recovery is complete, click Finish to restart the
computer.
7 Complete the registration process, and wait until you see the desktop.
8 Turn off the computer, reconnect all peripheral devices, and turn the computer back on.
9 Perform the procedure "Performing the post-recovery procedure" on page 48.

Starting system recovery from user-created recovery discs

This section contains the procedure for performing a system recovery from the recovery discs
you created as described in "Creating recovery discs" on page 45.
NOTE: System recovery deletes all data and programs you created or installed after
purchase. Therefore, ensure you back up, onto a removable disc, any data you want to keep.
To perform a system recovery using recovery discs:
1 If the computer is working, create a backup DVD containing all the data files you want
to save. When you are done, remove the backup disc from the drive tray.
CAUTION: All data on the hard disk drive will be deleted. You will lose
data if it is not backed up.
2 Insert recovery disc #1 into the DVD drive tray, and close the tray.
3 If the computer works, click the Start button, click the Arrow button next to Shut Down,
and then click Shut Down.
Or
If the computer is not responding, press and hold the On button for approximately 5
seconds, or until the computer turns off.
4 Disconnect all peripheral devices from the computer, except the keyboard and mouse.
5 Press the On button to turn on the computer.
If you are prompted to choose between running System Recovery from disc or from hard
drive, select Run program from disc, and then click Next.
6 Under I need help immediately, click Factory Reset.
7 If you are prompted to back up your files, and you have not done so, select Back up
your files first (recommended) button, and then click Next. Otherwise, select
Recover without backing up your files button, and then click Next.
8 If you are prompted to insert the next recovery disc, do so.
Troubleshooting and Maintenance 47