Table of Contents
Advertisement
17. Pieces counting function (F..-PCS)
That function allows for counting the
identical details, e.g. screws or nails, contained in
the weighed batch.
The measurement takes place in two phases:
- first
phase
–
calculation
weight
upon the
specified number of pieces 5, 10, 20, 50,
100, 200, or 500 detils,
- second phase – counting the details in the
weighed batch.
It is recommended, that the single detail weight
is higher
than the balance reading graduation,
and the weight of sample, used in the first
phase
is
higher
graduations.
To finish the function operation press MENU
button, then, using
and F..-0.
Notes:
The "Err-3" message means, that no
sample is put on the balance.
The same message is displayed, when the single
detail weight is lower than one
graduation
(user
keeping in mind, that it increases the error).
2. Selecting " _ _ " instead of details number
the
sample
recalls
value (that value must be entered, otherwise
the error message will be displayed).
3. During that function the
normally.
4. In the LCD display balances the " " sign is
replaced by "pcs".
info@tursdaletechnicalservices.co.uk
of
single detail
basis of
sample
than
100
of
T
button, select F..-PCS
may calculate the pieces,
the previously entered
T
operates
of
reading
reading
in
16
Advertisement
Table of Contents
