Intec Cyclone Instruction Manual page 6

Set up and Operation
System Set up: Set system on a dry, level surface.
Obtain appropriate protective equipment.
1.
Attach hose to machine outlet using a hose clamp.
2.
Open slide gate.
3.
Connect the wired remote to the wired remote receptacle on the control panel.
4.
Caution: Ensure that the toggle switches on the wired remote are in the OFF position. This will
ensure that you system does not start when you are not expecting.
Connect the supplied twist lock power cord's female end to the machine. Then
5.
plug the male end into to a dedicated 115V – 15amp outet.
T: 303-833-6644
Original Language - English
Cyclone Instruction Manual
www.inteccorp.com
| 5