Monessen Hearth ARTISAN Series Installation Manual page 28

THERMOCOUPLE MODULE
MODULE RESET
SWITCH
MODULATION
TOP BUTTON
ON/HI/MED/LO/OFF
LED PANEL
SWITCHES
BOTTOM BUTTON
COLOR SELECTION
JUNCTION BOX
Figure 6.3 - IntelliFire™ Plus ODS Wiring Diagram
28
Thermocouple Module Wire Assembly
CONTROL MODULE
I
S
FLAME
8K-1 to Adapter Box Wire Assembly
6 PIN WIRING HARNESS
NOTE: The LED components, rocker switch, wall switch wire and "Y" connector do not ship standard
with the 42" models. These options must be purchased separately with the AVFL42LED kit.
The LED components, rocker switch, wall switch wire and "Y" connector ship standard with the 48" and 60" models.
BLACK
BLACK
BLACK
BLACK
TRANSFORMER
Monessen • AVFL Series Installation Manual • 4099-901 Rev. E • 01/22
PILOT
ODS Adapter Box
"Y" CONNECTOR
F
M
F
RED
GREEN
BLUE
YELLOW
YELLOW AUX INPUT
CABLE PORT
LED STRIP
LED STRIP
M
12 FT WALL SWITCH WIRE
M
RED
M
F
BLK
BATTERY PACK
YELLOW AUX INPUT CABLE
CONTROL
NOTE: The five black plugs
MODULE
on the control module are
designed for the LED strips
only and can be used for the
LEDs in any configuration.
The yellow port is for wall
controls only.
RC300 4.5V DC
(AAA X 3)
WHT
RED
WALL
SWITCH