On/Standby; Connecting The Power Cable - FujiFilm FP-Z6000 Manual

Using the Remote Control

On/Standby

Connecting the Power Cable

Connecting the Power Cable
Attach the supplied cable lock.
1
b
TIP:
THE CABLE
LOCK
2 Connect the supplied power cable to the
projector and plug it into a power outlet.
The cable is secure when you hear the tabs
on the cable lock click into place.
4
CAUTION
To prevent the power cable being disconnected, secure it to the projector
using the supplied cable lock.
Use the supplied power cable only. In addition, note that supplied power
cable is for use exclusively with this product. Do not use the power cable with
any other device or the projector with any other power cable.
EN-22
Use a three-pin socket.