Installation; Choosing A Location; Spacing - FujiFilm FP-Z6000 Manual

Choosing a Location

Spacing

Spacing
When installing the projector, choose a location where the vents will be a safe distance
from walls or other obstructions. When installing units one above another, for example on
shelves, leave a distance of no less than approximately 10 cm (0.33 ft) between the shelves
and the wall.
Exhaust
vent
40cm
Intake vent
When installing two or more projectors side-by-side, leave a space of at least 80 cm (2.62 ft)
between them. You will also need to ensure that the warm air from the exhaust vent does
not enter any of the projectors' intake vents.
Do not obstruct the vents. The build-up of heat inside the projector could
4
CAUTION
cause fi re.

Installation

Intake
vent
40cm
40cm
80cm 30cm
EN-15
10cm