Advertisement
Your kettle will boil and switch off automatically. To re-
G
boil, wait a few seconds - the on/off switch needs time
to reset.
Note - To interrupt the boiling ensure that the
switch is in the off position before removing
from the powerbase.
If you experience problems with your kettle
G
switching on and off during use or switching
off before boiling, check that the flat element
is free from scale - see "descaling".
Your kettle is fitted with a filter to hold back limescale
G
particles.
If you find drops of water under your kettle, don't worry
G
- it is just condensation.
boil-dry protection
If you switch on with too little water, your kettle will cut
G
out automatically. Switch off, remove from the
powerbase and let it cool down before re-filling. When it
has cooled down, the switch will reset itself.
care and cleaning
Before cleaning, unplug your kettle and let it cool down.
G
the outside and powerbase
Wipe with a damp cloth, then dry. Do not use abrasives
G
- they will scratch the metal and plastic surfaces.
the inside
Even though your kettle comes with a filter, you still
G
need to clean the inside (and the filter) regularly.
the filter
1 Open the lid.
2 Slide the filter out
.
3 either rinse under the tap or use a soft brush.
or when descaling your kettle, drop the filter in too.
Rinse thoroughly.
4 Slide the filter back in to refit
descaling
Regular descaling of the flat element will improve the
G
performance of your kettle. If the kettle is not descaled
regularly the build up of limescale may result in the
following:
problems may be experienced with the kettle
G
switching on and off during use or switching off
before boiling.
the kettle may take longer to boil.
G
the flat element may be damaged.
G
.
Please note: Failure to descale your kettle may invalidate
your guarantee.
When limescale starts to build up on the heating
G
element, buy a suitable descaler and descale your
kettle. After descaling, boil with fresh water several
times and discard. Clean any descaler off the kettle - it
can damage the parts.
Some regions of the country have chalky water. This
G
makes boiled water look cloudy and leaves a deposit
on the side of the kettle. This is normal but can be
removed with regular cleaning.
Alternatively, to reduce limescale build up, use filtered
G
water to fill your kettle.
service and customer care
If the cord is damaged it must, for safety reasons, be
G
replaced by KENWOOD or an authorised KENWOOD
repairer.
If you experience any problems with the
operation of the kettle, before calling for
assistance refer to the troubleshooting guide.
UK
If you need help with:
using your kettle
G
servicing or repairs (in or out of guarantee)
G
call Kenwood Customer Care on 023 9239 2333.
Have your model number ready - it is located on
the underside of your kettle and powerbase.
spares and attachments
G
call 0844 557 3653.
other countries
Contact the shop where you bought your kettle.
G
Designed and engineered by Kenwood in the UK.
G
Made in China.
G
5
Advertisement
