Introduction - Fisher Scientific accumet AE150 User Manual

Introduction

Thank you for purchasing the Fisher Scientific accumet AE150 benchtop pH meter. Fisher
Scientific accumet essential (AE) meters are designed to provide the key functions needed
for routine measurements without complicated features and processes. AE150 pH benchtop
meters are designed with convenience in mind, offering user-friendly functionality and
storage/recall of up to 100 data sets in the non-volatile memory. As a space saver, a swivel
electrode holder can be attached to either side of meter for holding electrodes during
operation and storage.
The Fisher Scientific accumet AE150 pH benchtop meters are capable of measuring pH, mV
and temperature and are equipped with a LCD (Liquid Crystal Display) with simultaneous
display of pH and temperature measured values or mV and temperature measured values
for efficient sample reading and recording. These meters are designed for routine pH
measurements in laboratory applications.
Meter Features
•
One to five point pH calibration with automatic buffer recognition
•
Selection of two pH buffer sets
•
pH slope and offset display
•
One point mV calibration with ±150 mV offset adjustment
•
One point ATC temperature probe calibration with ±5 °C offset adjustment
•
Automatic or manual temperature compensation
•
Measure 0.00 to 14.00 pH with ±0.01 pH relative accuracy
•
Measure -1999 to 1999 mV with ±0.2 mV relative accuracy (±199.9 mV)
•
Measure 0.0 to 100.0 °C with ±0.3 °C temperature relative accuracy
•
Simultaneously display of pH value and temperature or mV value and temperature
•
Ready icon indicates measurement stability
•
Electrode condition icon indicates electrode status
•
100 point data set storage with non-volatile memory
•
Connects to analog device through recorder output
Important Notes and Safety Precautions
Please read this manual thoroughly before using your instrument. Any use outside of these
instructions may invalidate the warranty and cause permanent damage to the instrument.
For additional product information, contact your local authorized dealer, local technical sales
representative or contact us using the information on the page back of this manual.
The specifications, descriptions, drawings, ordering information, part numbers and
information presented in this manual are subject to change without notice and do not
represent a commitment on the part of Fisher Scientific.
3 of 28
accumet AE150 pH Benchtop Meter
www.fishersci.com