Download Print this page

Simplex 6351 Installation & Operating Instructions Manual

Time control centers

Hide thumbs

Table Of Contents

Table of Contents

Table of Contents
Pre-Power Adjustments
General Notes
Setting DIP Switches on CPU Board
Cpu Board
Bcd Output Format Settings
Generator Settings
Keypad Lockout & Timekeeping Settings
Synchronous Settings
Board (Optional)
6400 Coded/Impulse Board
6400 Coded Board
Remote Coded Relay Settings (6400 Only)
Secondary Clock Settings
Rapid Rate Advance Settings
Impulse Accumulator Settings
Setting DIP Switches on WWV Interface Board
Wwv Interface Board
Wwv Communication Settings
Wwv Baud Rate Settings
Section 2 - Installation Wiring
General Notes
Connections to Power/Interface Board
Power/Interface Board
Ac Power Wiring 115Vac
Ac Power Wiring 230Vac
Typical Wiring for Six Circuits of Bells/Horns Using External Power (6400 Only)
Typical Wiring for Six Circuits of Bells/Horns Using 6400 Line Voltage
Wiring for External Input
Connecting Tcc to Celestra Secondary Clocks
Secondary Clocks
Connecting Tcc to Synchronous Secondary Clocks Using Tcc Line Voltage
Connecting Tcc to Externally-Powered Transmitter
Generator
Connecting Tcc to Transmitter/Generator Using Tcc Line Voltage
Connecting 6400 to Externally-Powered Coded Relays (Optional)
Connecting 6400 to Coded Relays Using 6400 Line Voltage (Optional)
Connections to Impulse Interface Board (Optional)
Impulse Interface Board
Impulse Power Supply Wiring 115Vac (Optional)
Impulse Power Supply Wiring 230Vac (Optional)
13, 14, & 15 (Optional)
Connecting Tcc to 3-Wire Impulse Secondary Clocks (B Disconnect)
CONNECTING TCC to 3-WIRE SYNCHRONOUS SECONDARY CLOCKS - 6, 7, A, 8 9 (OPTIONAL)
Types 1 , 2, 3, 13, 14, & 15 (Optional)
Connecting Tcc to 2 or 3-Wire Dual Motor Secondary Clocks -Type 10 (Optional)
Types 11 & 12 (Optional)
Type 16 (Optional)
Secondary
Clocks - Type 17 (Optional)
Connections to 6800 Coordinated Universal Time Receiver (Optional)
Connection to Extended Battery (Optional)
Final Checkout
Operating Manual Override Switch(Es) for ON/OFF and PULSE Type Events (6400 Only)
Operating Manual Override Switch(Es) for DELAY Events (6400 Only)
Operating Manual Override Switch(Es) for SYNCHRONOUS Output
Signals
Operating Manual Override Switch(Es) for GENERATOR Output
Operating Manual Override Switch(Es) for SERIAL BCD Output
Section 4 - Operating Manual Override Switches (Optional Equipment)
Operating Manual Override Switch (CIRCUIT ONE) for REMOTE RELAYS
Operating Manual Override Switch for SECONDARY CLOCK Output
Advance Rates (Impulse Secondary Clocks)
Appendix A - General Mounting Instructions
Mounting Tcc Door, Retainer Panel, & Mounting Plate to Back Box
Connecting Cpu to Power/Interface
Board
General Notes
Mounting Instructions - Slides & Cable Carrier
Installing Rack-Mount Slides (6400 Only)
Installing Rack-Mount Cable Carrier (6400 Only)
Appendix C - Wwv Interface Board - Installation Instructions
INSTALLING Wwv
Interface Board
Appendixd - 6351 Keypad Operation and Basic Keypad Entries
Introduction
Keypad Operation
General Notes
Lcd Display
Keypad Normally Active Vs. Keypad Normally Inactive
Keypad Modes
Keypad
Basic Entries
To Enter Hour Format (12 or 24) for LCD
To Set the Time and Day of the Week
To Set the Date
Lcd after Depressing Time Key
Lcd after Depressing
Date Key
To Program the Automatic Daylight Saving Time (DST) Changes

Quick Links

1 Table of Contents
2 Synchronous Settings
3 Keypad Lockout & Timekeeping Settings
4 To Set the Time and Day of the Week
Download this manual

firealarmresources.com

Table of Contents

Need help?

Do you have a question about the 6351 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

6400

Save PDF

Simplex 6351 Installation & Operating Instructions Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Simplex 6351

This manual is also suitable for:

Table of Contents