Part 3 Connections & Dipswitches; Part 4 Dipswitch 4-In-1 Technology - Zip SEE378 Instruction Manual

xSEE378
Connections & Dipswitches
The camera has a 2.1mm socket which requires 12V DC, use a regulated power supply rated
above the current draw of the camera.
The camera is polarity sensitive so connections must be correctly made.
The camera has a standard BNC connector for the 4-in-1 video output, the output can be
changed to AHD, CVI or CVBS if required.
Dipswitch 4-In-1 Technology
Selectable HD-TVI, HD-CVI, AHD and CVBS (Analogue) Output. As default the camera is
set to HD-TVI, however the output can be changed to AHD, CVI or CVBS if required.
This output can be changed with the dip switches on the fly-lead of the camera. Please note the
"Output Mode" in the menu of the DVR won't change the format, as the dip switch overrides the
output.
The dip switch configuration can be found below:-
04/04/2022
ZipDVR.com
2