4 Removal And Replacement Procedures Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP 15-ew0 Series Maintenance And Service Manual

4 Removal and replacement procedures
preliminary requirements
Use this information to properly prepare to disassemble and reassemble the computer.

Tools required

You need the following tools to complete the removal and replacement procedures:
Nonconductive, nonmarking pry tool
●
Phillips P0 screwdriver
●
Phillips P1 screwdriver
●
Suction cups
●
Torx5 screw driver
●
Tweezers
●

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly and
assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts.

Cables and connectors

Handle cables with extreme care to avoid damage.
IMPORTANT:
reassembly process. Improper cable placement can damage the computer.
When servicing the computer, be sure that cables are placed in their proper locations during the
Removal and replacement procedures preliminary requirements 25