Table of Contents
Advertisement
‒
The fixing unit and its surroundings inside the machine become hot
during use. When removing jammed paper or when inspecting the
inside of the machine, do not touch the fixing unit and its
surroundings, as this may result in burns.
‒
When removing jammed paper or when inspecting the inside of the
machine, do not expose yourself to the heat emitted from the fixing
unit and its surroundings for a prolonged period of time. Doing so may
result in low temperature burns, even though you did not touch the
fixing unit and its surroundings directly.
‒
If paper is jammed, remove the jammed paper so that any pieces of
paper do not remain inside the machine according to the displayed
message. Also, do not put your hand in an area other than indicated
areas, as this may result in personal injuries or burns.
‒
When removing jammed paper or replacing a toner cartridge, be
careful not to get any toner on your hands or clothing, as this will dirty
your hands or clothing. If toner gets on your hands or clothing, wash
them immediately with cold water. Washing with warm water sets the
toner, making it impossible to remove the toner stains.
‒
When removing jammed paper, be careful not to allow the toner on
the paper to scatter. The toner may get into your eyes or mouth. If
toner gets into your eyes or mouth, wash them immediately with cold
water and consult a physician.
‒
When loading paper or removing jammed documents or paper, be
careful not to cut your hands with the edges of the paper.
‒
When removing a toner cartridge, remove the toner cartridge carefully
so as to prevent the toner from scattering and getting into your eyes
or mouth. If toner gets into your eyes or mouth, wash them
immediately with cold water and consult a physician.
‒
Do not attempt to disassemble the toner cartridge. The toner may
scatter and get into your eyes or mouth. If toner gets into your eyes or
mouth, wash them immediately with cold water and consult a
physician.
‒
If toner leaks from the toner cartridge, be careful not to inhale the
toner or allow it to come into direct contact with your skin. If the toner
comes into contact with your skin, wash with soap. If the skin becomes
irritated or you inhale the toner, consult a physician immediately.
Consumables
‒
Do not dispose of used toner cartridges in open flames. This may cause
the toner to ignite, resulting in burns or fire.
‒
Do not store toner cartridges or paper in a location exposed to open
flames. This may cause the toner or paper to ignite, resulting in burns
or fire.
‒
When disposing of a toner cartridge, place the toner cartridge into a
bag to prevent the toner from scattering, and then dispose of the
toner cartridge according to local regulations.
‒
Keep the toner cartridges and other consumables out of the reach of
small children. If the toner or other parts are ingested, consult a
physician immediately.
‒
Do not attempt to disassemble the toner cartridge. The toner may
scatter and get into your eyes or mouth. If toner gets into your eyes or
mouth, wash them immediately with cold water and consult a
physician.
‒
If toner leaks from the toner cartridge, be careful not to inhale the
toner or allow it to come into direct contact with your skin. If the toner
comes into contact with your skin, wash with soap. If the skin becomes
irritated or you inhale the toner, consult a physician immediately.
‒
Do not pull out the sealing tape forcefully or stop at midpoint, as this
may cause toner to spill out. If toner gets into your eyes or mouth,
wash them immediately with cold water and consult a physician.
Others
If you are using a cardiac pacemaker
This machine generates a low level magnetic field. If you use a cardiac
pacemaker and feel abnormalities, please move away from this machine
and consult your physician immediately.
Installation Requirements and Handling
In order to use this machine in a safe and trouble-free manner, install the
machine in a place that fulfills the following conditions. Also, read the
remarks carefully.
Temperature and Humidity Conditions
‒
Temperature range: 10 °C to 30 °C (50 °F to 86 °F)
‒
Humidity range: 20 % to 80 % RH (no condensation)
Protecting the machine from condensation
‒
To prevent condensation from forming inside the machine in the
following cases, let the machine adjust to the ambient temperature
and humidity for at least two hours before use.
•
When the room where the machine is installed is heated rapidly
•
When the machine is moved from a cool or dry location to a hot or
humid location
‒
If water droplets (condensation) form inside the machine, this can
result in paper jams or poor print quality.
When using an ultrasonic humidifier
‒
When you are using an ultrasonic humidifier, it is therefore
recommended that you use purified water or other water that is free of
impurities. If you use tap water or well water, impurities in the water
will be dispersed through the air. This can be trapped inside the
machine, causing degradation in print quality.
Power Supply Requirements
220 V to 240 V, 50/60 Hz
Precautions when connecting the power cord
‒
Do not connect this machine to an uninterruptible power source.
‒
Use an AC power outlet exclusively for the machine. Do not use the
other sockets of the AC power outlet.
‒
Do not plug the power plug into the auxiliary outlet on a computer.
‒
Do not use the same AC power outlet for both the machine and any of
the following equipment.
•
Copy machine
•
Air conditioner
•
Shredder
•
Equipment that consumes a large amount of electricity
•
Equipment that generates electrical noise
‒
When unplugging the power cord, keep interval of 10 seconds or more
before plugging it again.
Miscellaneous precautions
‒
The maximum power consumption of the machine is as follows.
MF5870dn: 1300 W or less
‒
Electrical noise or a dramatic drop in mains voltage may cause the
machine or computer to operate incorrectly or lose data.
23
Advertisement
Table of Contents
