Matrix COSEC Panel Quick Start Manual page 16

Place the Mounting template on the wall and mark the points for drilling holes for the
two wall anchors. Drill a hole of appropriate size and place the nail grips in the
holes. Ensure that the wall anchors protrude slightly from the wall. Align the
keyhole slots on the back of the PANEL enclosure with the wall anchors on the wall.
Slide the PANEL enclosure downwards to secure it on the wall.
Step 6: Powering up the PANEL
Once all the connections are checked, power up the PANEL which in turn will go
through the booting process. The LEDs on the PANEL enclosure will flash twice
followed by a beep to signal the end of the booting process.
10 Matrix PANEL Quick Start