Clearaudio concept V2 User Manual page 3

User manual / Bedienungsanleitung
1. Maintenance
• Before playing a record, please remove all dust and dirt from
the record's surface using a quality cleaning device. For the best
results, a record cleaning machine should be used.
Ask your dealer about Clearaudio´s matrix cleaning machines.
• Always keep the stylus tip clean. Clean the needle regularly
with a soft brush or with a commercially available cleaning fluid
(Clearaudio Elixir of Sound Art. No. AC003).
Please make sure that no liquid gets on the cartridge body.
• Avoid storing the cartridge near devices with electrical
transformers and motors that can generate magnetic fields.
Any demagnetization could result in a loss of output voltage and
thus distortion or deterioration in the sound.
• Please note:
Never disconnect your tonearm cable from your pre-amplifier
while your unit is still on. Please switch your pre-amplifier off
before starting to disconnecting your tonearm connectors from
the phono inputs of your pre-amplifier.
Important - please note:
Do not try to remove the stylus assembly yourself.
Any damage caused by failure to follow the advice given in the
Clearaudio user manual will invalidate the product warranty.
Clearaudio will assume no liability for any such damage.
Made in Germany
Safety instructions
Page / Seite 3