HP Kayak XW U3-W3 User Manual page 15

riotx.bk : riotx-us.fb4 Page 11 Tuesday, December 16, 1997 3:08 PM
3 When the board touches the slots, line up the board and then push it
into the two slots. Then using both thumbs, press down each panel
of the board to ensure that both connectors are firmly in their slots.
4 Secure the board by replacing the slot cover screw.
5 Replace the computer's cover. Reconnect all cables and power cords.
1 HP VISUALIZE fx4 Texture Module User's Guide
Installing the Texture Module
English English 11