HP Kayak XW U3-W3 User Manual page 11

riotx.bk : riotx-us.fb4 Page 7 Tuesday, December 16, 1997 3:08 PM
WARNING
TIPS
Before handling the VISUALIZE fx4 graphics board, first wait until the
board has cooled down completely before touching it. The graphics
board can become hot during use.
4 Unscrew the innermost screw that holds the board in place and then,
using both hands, carefully slide the board up and out of the
computer.
To free the board, hold it at either end and slowly lever each
end up, using a careful seesaw motion to free the board from
the connectors.
When sliding the board up, ensure that the board does not snag
or catch against the chassis by keeping it perfectly straight.
5 Place the board on a clean, dry surface.
1 HP VISUALIZE fx4 Texture Module User's Guide
Installing the Texture Module
English English 7