Replacing The Visualize Fx4 Interface Board - HP Kayak XW U3-W3 User Manual

riotx.bk : riotx-us.fb4 Page 10 Tuesday, December 16, 1997 3:08 PM
TIP
1 HP VISUALIZE fx4 Texture Module User's Guide
Installing the Texture Module

Replacing the VISUALIZE fx4 Interface Board

1 First ensure that the system board data cables are correctly routed
and flat against the system board so that they do not obstruct the
VISUALIZE fx4 interface board.
2 Using both hands, hold the board at a slight angle (as shown below)
and carefully slide it down towards the slots, keeping it at an angle.
When sliding the board down, ensure that the board does not
snag or catch against the chassis.
10 English English