Post Test Sequence And Post Error - HP Kayak xu700 Technical Reference Manual

6 Tests and Error Messages
MaxiLife Test Sequence and Error Messages

Post Test Sequence and Post Error

In this phase, MaxiLife waits for any error messages that the BIOS may
issue. If such an error occurs, then an error code is displayed on the monitor
screen.
On the HP Kayak XU700 Minitower PC Workstation, a screen similar to
the following example is displayed. The error code that appears on the LCD
status panel is the same as the one that appears on the monitor screen. If
the POST issues several error codes, only the last one is visible on the LCD
status panel.
The following diagrams show the different BIOS-generated errors.
BIOS
"read system memory"
"BIOS"-Generated Errors
BIOS
Video
Slots
100
ERROR
Keyboard Test
"BIOS" ERROR
MaxiLife
"Spy System
Memory"
System Memory
"No Video"
MaxiLife
Beep Codes
There is a time-out of 3 seconds before
the message is displayed on the LCD
status panel and video display.
ERROR
BIOS Check sum
LCD Status Panel
ERROR
No Video
LCD Status Panel