HP Kayak xu700 Technical Reference Manual page 103

System Info
Boot Steps
Boot report
Obtains information from the BIOS and the system's Serial EEPROM. This
information includes: product name, BIOS version, serial number, number of
processors and speed, size of memory for each socket. The following
diagram shows how the System Info obtains its information.
strings in EEPROM
Shows the Power-On-Self-Test (POST) codes during the system startup.
The POST code is provided by the BIOS and is displayed on the LCD panel
as soon as it is available. If the system stops during the startup, the last
successful boot step POST code is displayed on the LCD. When Boot Steps
is selected, the POST step will be shown on the LCD status panel during the
subsequent boot processes.
To ensure that MaxiLife is ready to display the first POST codes as soon as
possible, the Pre-boot diagnostics are not executed when the system is
booted with the Boot Steps option selected. The following diagram shows
how Boot Steps obtains its information from the BIOS, and then displays a
POST error if needed.
System Info
Boot Steps
Next
This is a toggle item,
which is indicated with
a check mark
Runs a set of diagnostics assessing the system's components. Results of the
tests are displayed on the LCD status panel, one after another, when the
LCD buttons are pressed.
System Info
MaxiLife
Write
BIOS
DMI Table
MaxiLife
Ok
"Write
POST
Code"
BIOS
6 Tests and Error Messages
MaxiLife Test Sequence and Error Messages
HP Kayak XU700
Info
LCD Status Panel
HP KAYAK XU700
Post Code 24
"Write
POST
ERROR"
Error
Post Code XX
Services
103