HP Kayak XM600 User Manual page 59

NOTE
HP Kayak XU800 PC Workstation
There are ten system board switches used for configuration, numbered
from 1 to 10. Of these a certain number are reserved and should not be
modified, otherwise it could lead to a system failure.
Switch
1
2
3
4
5
6
7
8
9
10
Switches can also be referenced as:
UP = Open = Off (disable)
DOWN = Close = On (enable)
2 Installing and Replacing Hardware Parts in Your PC Workstation
Default Position
UP Enables normal mode.
DOWN enables the BIOS recovery mode at next boot.
UP Reserved. Do Not change Default Setting
UP Enables User and System Administrator passwords.
DOWN clears the passwords at next boot.
UP Retains CMOS memory.
DOWN clears CMOS memory at next boot.
UP
Reserved 5-6. Do Not change Default Settings
DOWN
DOWN Enables keyboard power-on.
UP disables this option.
DOWN
DOWN
Reserved 8-10. Do Not change Default Settings
UP
System Board Switches
To Configure:
59