HP Kayak XM600 User Manual page 22

2 Installing and Replacing Hardware Parts in Your PC Workstation
Up to six accessory cards can be
installed:
- One Universal AGP PRO (graphics)
- Five 32-bit PCI slots
Primary IDE
Connector
Single Memory Expansion Card Connector, supporting
either four RIMM sockets or, four DIMM sockets
- PCI 1 slot (32-bits 33 MHz)
- PCI 2 slot (32-bits 33 MHz)
- PCI 5 slot (32-bits 33 MHz,)
- PCI 3 slot (64-bits 66 MHz)
- PCI 4 slot (64-bits 66 MHz)
One Universal AGP PRO
slot (graphics)
HP Kayak XM600 PC Workstation System Board
Depending on the model, the memory module sockets support either:
•
Two RDRAM modules.
•
Two SDRAM modules installed in a Memory Expansion Card.
HP Kayak XU800 PC Workstation System Board
16-bit Internal U160
68-pin SCSI connector
22
Secondary IDE Connector
VRM socket. Only to be
used with second
processor
Support for one or two
processors
Floppy Disk Drive
Connector
Support for one or two
Pentium III processors
Floppy Disk Drive
Connector
Secondary
IDE Connector
Primary IDE
Connector