Vitek VT-3627 Manual Instruction page 5

AUTO SWITCH-OFF FUNCTION
•
The meat grinder is equipped with an auto
switch-off function in case of electric motor
overheating.
•
In case of electric motor overheating, the auto-
matic thermal switch will be on, and the meat
grinder will be switched off.
•
In this case immediately remove the power plug
from the mains socket.
•
Let the meat grinder cool down for approxi-
mately 50-60 minutes before switching it on
again (the unit can cool down longer if the room
temperature is high).
•
Plug the meat grinder into the mains, switch it
on, if the meat grinder can not be switched on,
this may mean that it is otherwise damaged. In
this case apply to any authorized service center
at the contact address list given in the warranty
certificate and on the website www.vitek.ru for
repairing the meat grinder.
MEAT GRINDER CARE
•
After finishing operation, switch the meat grinder
off by setting the switch (7) to "0 "position, and
unplug the unit.
•
Press the lock button (5), turn the meat grinder
head clockwise and remove it.
•
Unscrew the nut (11) and remove the cutting
plate (10) and the crossed blade (9) from the
screw (8).
•
Remove the screw (8) from the meat grinder
head (3).
•
Remove remains of food from the screw (8).
•
Wash all accessories (1, 2, 3, 8, 9, 10, 11) of
the meat grinder with warm water and a neu-
tral detergent, rinse and dry thoroughly before
assembling.
•
Clean the meat grinder body (6) with a damp
cloth and then wipe it dry.
•
Do not use solvents or abrasives to clean the
meat grinder body (6).
•
Provide that no liquid gets inside the meat
grinder body.
•
Oil the cutting plate (10) and the blade (9) with
vegetable oil before taking the dried accesso-
ries away for storage – this will protect them
from oxidation.
STORAGE
•
Before taking the meat grinder away for stor-
age, make sure that the meat grinder body and
all removable parts are clean and dry.
•
Keep the unit out of reach of children and dis-
abled persons.
DELIVERY SET
Meat grinder – 1 pc.
Meat grinder head assembled (with screw, blade,
cutting plate and nut installed) – 1 pc.
Pusher – 1 pc.
Food tray – 1 pc.
Warranty certificate – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 250 W
Maximum power: 2000 W
RECYCLING
For environment protection do not throw out the unit
and the batteries (if included), do not discard the
unit and the batteries with usual household waste
after the service life expiration; apply to specialized
centers for further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this prod-
uct apply to a local municipal administration, a dis-
posal service or to the shop where you purchased
this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@ vitek.ru for
receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage
Directive 2014/35/EU.
5
ENGLISH