Heinner MG-D1800BK Manual page 19

www.heinner.com
5. Press the rocker switch to "ON" position, the appliance turns anti-clockwise and the
meat powder enters the small intestine, you can tie anywhere you like with thread to
make the sausage has proper length.
6. After the blending function which mention above (Sinewless, boneless and fatless
meat is recommended, approximate size: 20 mm x 20 mm x 60 mm)), put the meat into
this function "Making meat plate". See arrow fig.8 and fig.9.
Kibble shaper
7.Press the rocker switch"ON"position, the appliance turns anti-clockwise and
the meat powder enters the small intestine, then you can make any shape of meat plate.
8. The max operation time per time shall not exceed 7 minutes and minimum 10 minutes
rest time must be maintained between two consecutive cycles.
Reverse function
1. In case of jamming press the rocker switch to "OFF" position. Wait at least one
minute until ream meat rod has come to a complete stop.
2. Press the rocker switch to 'REV' position. Ream meat rod will be rotating
anti-clockwise and the ream meat tube will get empty. If the main machine doesn't
work, press the rocker 'OFF' and clean it.
Note: the 'REV' position max operation time shall not exceed 5s.
Fig. 8
Align the location lug
with the groove
1800W, 50-60Hz, 220-240V
Fig. 9
18