Heinner MG-D1800BK Manual page 17

www.heinner.com
6. The max operation time per time shall not exceed 7 minutes and minimum 10
minutes rest time must be maintained between two consecutive cycles.
7. Place a clean container with proper size under lock nut to receive meat powder
come from the appliance.
8. When finish blending, unplug to the power source. Disassemble the ream meat tube
assembly: press down release button properly with thumb of left hand (see arrow 1 of
Fig. 3), turn the ream meat tube assembly clockwise with right hand then remove
them (see arrow 2 of fig. 3).
1. press the release button
Caution: ensure that the main machine is unplugged when disassembling.
Making sausages
1. Assemble the ream meat rod, kibble cone, sausage pole, lock nut as illustrated as
figure (see fig. 4 and fig. 5).
Fig. 4
Sausage pole
Kibble cone
Align the location lug with
the groove
1800W, 50-60Hz, 220-240V
2
Fig. 3
Fig. 5
16