Figure 11. Properly Seating The Processor; Figure 12. Top View Of Processor And Cross-Torque Pattern - HP i2000 Hardware Installation

7. Locate the four- (4) brass, Castle-head nuts and fasten the nuts to the four- (4)
threaded retention studs. Utilize the cross-torque pattern referenced in Figure 12.
8. Use a torque driver and tighten the screws to 10 inch-pounds.
1
3

Figure 12. Top View of Processor and Cross-Torque Pattern

18

Figure 11. Properly Seating the Processor

hp workstation i2000
4
2