Removing The Workstation Access Panel - Compaq Evo W8000 Hardware Reference Manual

Removing the Workstation Access Panel

Compaq Evo Workstation W8000 Hardware Reference Guide
CAUTION: Never operate you workstation with the access panel
removed. The access panel is required for proper cooling.
To remove the workstation access panel
1. Shut down the operating system properly, then turn off the
workstation and any external devices. Disconnect the power cord
from the grounded AC outlet.
2. To remove the workstation access panel, refer to the following
illustration.
Loosening the four thumbscrews and removing the workstation
access panel
When replacing the workstation access panel, be sure to tighten all
four thumbscrews.
Hardware Upgrades
2-3